Accessories for 20mm tape

Electric Fence Safety System > Accessories for 20mm tape

Insulator and tensioner

Why a fence with a ribbon 20 mm?

Our aim is to: reduce the cost of your enclosures without compromising the quality, durability, electrical conductivity and safety!
In fact, thanks to the quality of our electrified tape, the same diameter of the various stainless steel wires (5 x 0.40 mm), polyethylene (0.50 mm) and the two wires from 1mm shock as those of tape 40mm, the quality is at least comparable ! Obviously has a whole range of accessories, let's see ...


Ref. 9N It is an insulator that does it all! Is the latest! Solid, supports and locks the belt. Simple and intuitive, it locks with a key 10. You can put on pallets fiber Ref 7A/B/C; just insert the stake into predetermined hole Ø 12 mm.		Ref. 9B You can enter on any poles, even in our cast iron Ø 10 mm! It has a bolt which locks up top.


Ref. 9V With two self-tapping screws for wood, can be installed on any wooden surface, then if you use the plastic anchors 6mm you can anchor on the walls.				Ref. 9G Easy to use, with a bolt, is fixed to a self-tapping screw which secures it easily on all the wood surfaces.


Ref. 9 Corner Insulator Due to its robustness can also be used as corner! Pass the tape just locking it, stretch the tape and tightened by hand or with the key 10..		Ref. 9F Tensioner By placing the buckle in Ref 9N you get a tensioner to be used on long-haul on the doors or dividers. The electrical connections are made through this buckle		Ref. 35V Tensioner for medium or small tape with screws Stainless steel buckle strong and durable, the plastic insulator. Also available in Ref 35B with bolt

How to fix the tape


Lift the clasp, insert the dubbed tape and lower the barb, the Ref. 44 can be screws (Ref. 44V) or bolts (Ref. 44B).				Just as easily you can remove just pull with one hand to remove the tension.


Secure the excess tape with clips