Splicer buckle

Rif. 24   Rif. 24   Rif. 24

Ref. 24
For 40 mm tape

 

Ref. 22
For 20 mm tape

 

Rif. 39
For 13 mm tape

They are used to make the joints on the tape. Ensure a perfect contact between all the wires of stainless steel, improving the qualities of the current. If you notice a spark from a thread to another, fear not: cut the ribbon and put a buckle. You will have re-established good electrical connection. The splicer buckle allows the slack in the tape and to connect with the connectors to bring electricity properly.

Le fibbie di connessione
Rif. 51   Rif. 21A e 21B   Rif. 49

Ref. 51
Martyr
It absorbs the blows of mace for poles Rif. 47P - Rif. 47M

 

Ref. 21A - Ref. 21B
Buckles
They function as the buckles of the backpacks:
"A" is for the tape 40 mm
"B" is for the tape 20 mm and 13 mm

 

Ref. 49
Stake driver
For fiberglass poles

Rif. 27   Rif. 32

Ref. 27
Warning
In Italian, by law, must be put on all the fences near roads and walkways every 100 m

 

Ref. 32
Winder / unwinder
For coils of 250 m 40mm tape, and 500 m, 20 mm and 13 mm

Handle Gate

Rif. 11A   Rif. 11B   Rif. 11X

Ref. 11A
insulated gate handle is designed specifically for our 40mm tape with an external spring that tensions the tape gate. You can fix it on the tensioner Ref 44V

 

Ref. 11B
insulated gate handle is designed for 20mm/13mm tape

 

Ref. 11X
This gate handle is not insulated and is made for 40mm tape, all stainless steel. No one can touch it if not been switched off.

Rif. 52   Rif. 53A   Rif. 52B TOGLE

Ref. 52
Circuit isolating switch
This will isolate runs of fence or whole fields to enable you to work on them without having to turn off the whole system. It cuts off unused fields if your energiser is not too powerful

 

Ref. 53A
Lightning diverter
The lightning diverter can sustain moderate lightning strikes and protects your mains energiser. It is advisable to install one at the start of the fence system when using a mains

 

Ref. 52B TOGLE
Switch to soils with poor conductivity
Here's a switch that can link a portion of the tapes on the ground and then allow the horse that touches both the tapes, closes the circuit and take the shock

Rif. T1   Adattatore   Rif. Clips

Ref. T1
Ground Rod
Dissipates to the ground.
For very large paddock, consider three delta-connected

  Ref. ADD
Nut Driver
With just one tool, thanks to this adapter you can use your screwdriver and screws for both the anchor bolts Hexagon turnbuckles Ref 44
  Ref. CLIPSBP
Round Keeper Clip
With this clip you can fix the tape access.