Badi Farm

Some tips for fence-intrusion deer:

• the fence is 2 or 3 heights with tape 40mm Ref B4 by
  differentiating according to the animals: using higher tape
  to allow better visibility
• 2or 3tapes using pallets Ref. 12/3, in each case: distance from
  the ground of the first tape and 35cm distance from the ground
  of the last tape 70cm/1m
• medium-sized animals such as chamois and fallow deer, 2 belts
  always 40mm, distance from the ground and first tape 40cm
  distance from the ground from the second tape 90cm
• large animals with horns, tape Ref B4 40mm, distance from the ground and first tape 60/70cm distance from the ground from the second tape 120/130cm. Very often you use the poles from 2m Ref 7C with three tapes
• fiberglass poles Ref 7A straight sides (to mount isolators Ref 8N on the balusters and then plant the stakes with a bat better if plastic)
• insulators corner Ref 45V to mount on V / S wooden posts with a minimum section 10cm x 10cm
• Ref 44V tensioners to use at the beginning and end of the tape and to the sides of the gates that are created with handle Ref 11A,always to be mounted on wooden poles with a minimum section 10cm x 10cm;

The tricks matured with experience small tips below to make sure that our material is achieved the desired effect.

Deer with large antlers:
This application is recommended by us but putting the wooden stake Ref 47P and the shockproof poles not vertical but inclined about 45 ° to the outside of the fence - this is to allow the animal to deal first with the bottom tape and then with the higher one with horns, even though its not cheap even multiple layers of tape are recommended.

The poles can be placed every 5 meters in not windy areas. For hornless deer our system can also be held vertically. Prefer the white color!